Liftmaster LA400 Residential DC Linear Gate Operator User Manual download pdf (Page 17)

TEST GATE TRAVEL

NOTE:

If gate does not open and close completely adjust the position of the

gate bracket and mark new mounting holes.

Ensure that the operator does not bind against the Pull-to-Open bracket.

Ensure that the piston does not bottom out.

Manually open and close the gate.

1/2" (1.3 cm)

Do not allow piston to fully extend or fully retract.

SECURE POST BRACKET TO GATE POST

The gate operator (arm) must be level.

Drill adequate holes in the gate post.

Secure the post bracket to the gate post using hardware.

Mark holes for the post bracket. Remove the clamp and the operator, set aside.

INSTALLATION » TEST GATE TRAVEL + SECURE POST BRACKET TO GATE POST

1/2" (1.3 cm)

Flat Washers

Hex Nuts

Lock Washers

Carriage Bolts

Welder (Optional)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

No comments

Liftmaster LA400 Residential DC Linear Gate Operator User Manual Page 17