search

Liftmaster LA400 Residential DC Linear Gate Operator User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 14
14
INSTALLATION » DETERMINE MOUNTING LOCATION + MEASURING AND MARKING FOR THE GATE BRACKET
DETERMINE MOUNTING LOCATION
The gate post bracket assembly can be mounted several places on the gate post.
Refer to the illustrations on page 11 for the ideal mounting location.
Refer to the illustrations to determine the appropriate dimensions for the
Pull-to-Open bracket.
NOTE:
It may be necessary to add shims (angle iron, sheets of metal or wood) to
the gate post to achieve the required dimensions.
Gate Post
Gate Hinge Point
7" (18 cm)
Operator
Hinge
Point
7" (18 cm)
Gate Post
Gate Hinge Point
7" (18 cm)
Operator
Hinge Point
7" (18 cm)
Gate Post
Gate Hinge Point
7" (18 cm)
Operator
Hinge Point
7" (18 cm)
Gate Post
Gate Hinge Point
7" (18 cm)
Operator
Hinge Point
7" (18 cm)
Gate Post
Gate Hinge Point
7" (18 cm)
Operator
Hinge Point
7" (18 cm)
Gate Post
Gate Hinge Point
7" (18 cm)
Operator
Hinge Point
7" (18 cm)
Close the gate.
Close the gate.
Place the template (provided on the back page of this manual) under the center
of the gate hinge point.
Place the measuring tape under the center of the gate hinge point and measure
out 7 inches (18 cm).
Use a screwdriver or dowel rod to temporarily mark the location in front of the
gate post.
Use a screwdriver or dowel rod to temporarily mark the location of the first
measurement.
1
1
2
2
3
3
4
5
MEASURING AND MARKING FOR THE
GATE BRACKET
Before proceeding, begin with the gate in the fully closed position. There are two
methods for determining the proper location of the post brackets:
• Paper template (Located on the back page of this manual. Must be cut out.)
• Tape measure.
Either method will work depending on preference.
TEMPLATE METHOD
TAPE MEASURE METHOD
Measure 7 inches (18 cm) from the previous mark.
Use the screwdriver or dowel rod to mark the location of the second
measurement.
Gate Post
Gate
Gate Post
TOP VIEW
TOP VIEW
1
2
1
2
3
Gate Hinge Point
Gate Hinge Point
7" (18 cm)
7" (18 cm)
Gate
3
5
4
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Comments to this Manuals

No comments
Related products and manuals for Safety Liftmaster LA400 Residential DC Linear Gate Operator
Safety Liftmaster T Industrial-Duty Trolley Operator for Standard Li User Manual   (2 pages)
Safety Liftmaster RSW12V Residential / Light Commercial Swing Gate O User Manual   (2 pages)
  • CrystaLok LXE Amba-towel-warmers DuPont Verify Audio Incorporated
  • Zanussi Cookers Hobart Slicers Rival Ice cream makers Pass Labs Audio amplifiers GE Power generators
  • Behringer EPA900 Samson QV Cisco Systems 3000 Samsung SGH-P510 Fluke 9140 Dry-well Calibrator
  • Acer TravelMate P278-M User Manual VeriFone VX 680 User Manual Samsung YP-P2JCB User Manual Saeco HD8966/01 User Manual Sharp TM-20 User Manual