Liftmaster 882LM Multi-Function Control Panel User Manual

Browse online or download User Manual for Safety Liftmaster 882LM Multi-Function Control Panel. LiftMaster 882LM Multi-Function Control Panel Manuel d'utilisation [de]

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1
To prevent possible SERIOUS INJURY or DEATH from electrocution:
Be sure power is NOT connected BEFORE installing door control.
Connect ONLY to 12 VOLT low voltage wires.
To prevent possible SERIOUS INJURY or DEATH from a closing garage door:
Install door control within sight of garage door, out of reach of children at a minimum
height of 5 feet (1.5 m), and away from ALL moving parts of door.
NEVER permit children to operate or play with door control push buttons or remote control
transmitters.
Activate door ONLY when it can be seen clearly, is properly adjusted, and there are no
obstructions to door travel.
ALWAYS keep garage door in sight until completely closed. NEVER permit anyone to cross
path of closing garage door.
MULTI-FUNCTION CONTROL PANEL (SECURITY
2.0
TM
)
MODEL 882LM
Feature Overview
Multi-Function
Control Panel
Safety Reversing
Sensors
Yellow
LEARN Button
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifi cations of this receiver and/or transmitter are
prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards for Home or offi ce use. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
For use with Security 2.0
TM
Garage Door Openers. All Security 2.0
TM
Garage Door Openers have
a yellow Learn button and a yellow antenna wire. The features are adjustable and may be turned
off or on as desired. Refer to the Feature Settings section.
LIGHT BUTTON
Press the LIGHT button to turn the garage door opener lights on or off. When the lights are turned
on they will stay on until the LIGHT button is pressed again, or until the garage door opener is
activated. Once the garage door opener is activated the lights will turn off after the specified period
of time (the factory setting is 4-1/2 minutes). The LIGHT button will not control the lights when the
door is in motion.
LOCK
The LOCK feature is designed to prevent activation of the garage door opener from remote controls
while still allowing activation from the door control and keyless entry. This feature is useful for
added peace of mind when the home is empty (i.e. vacation).
MAINTENANCE ALERT SYSTEM (MAS)
This feature assists the homeowner in ensuring the garage door opener system stays in good
working condition. When the garage door opener needs to be serviced (approximately 4500 garage
door opener cycles) the command (yellow) and service (red) LEDs will begin to alternately flash
back and forth. The MAS feature can be activated at time of installation. Contact your installing
dealer for service. The factory setting for the MAS feature is off.
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Feature Overview

1To prevent possible SERIOUS INJURY or DEATH from electrocution:• Be sure power is NOT connected BEFORE installing door control.• Connect ONLY to 1

Page 2 - Installation

2REDWHITEWHITEGREYWHWHITEEInstallationInstall the door control within sight of the garage door at a minimum height of 5 feet (1.5 m) where small child

Page 3 - Operation

3TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PINNOTE: The following steps are for standard accessories. If programming is unsuccessful

Page 4 - Warranty

4FOR SERVICE DIAL OUR TOLL FREE NUMBER:1-800-528-9131www.liftmaster.comFeature SettingsLOCKActivate:NOTE: Your remote controls will NOT work when LOCK

Page 5 - Aperçu des fonctions

1PANNEAU DE COMMANDE MULTIFONCTION (SECURITY✚ 2.0TM) MODÈLE 882LMAperçu des fonctionsPour utilisation avec les ouvre-portes de garage Security✚ 2.0TM.

Page 6

2InstallationPosez la commande de la porte en vue de l'ouvre-porte de garage, à un minimum de 1,5 m (5 pieds) du sol, où les enfants ne pourront

Page 7 - Programmation

3BARRE DE POUSSÉEAppuyez sur la barre de poussée pour ouvrir ou fermer la porte.ÉCLAIRAGE DE L'OUVRE-PORTE DE GARAGEAppuyez sur la bouton Éclaira

Page 8 - Garantie

© 2012, The Chamberlain Group, Inc. All Rights Reserved114A4007 Tous droits réservés VERROUILLAGE (LOCK)Activer : REMARQUE : Vos télécommandes ne

Comments to this Manuals

No comments